Tips On How To Change An AC Charging Handle

An electric can have a charging handle. This is an accessory that you need to install for your rechargeable batteries or other electrical devices that need charging. Many people do not know how to do it, and they are afraid that they will break the device if they do not use it correctly. Here is some information on how to install a charging handle.

The first thing that you have to do is to remove the batteries from the device. You have to unplug them so that you can safely remove the charging handle. It may be too dangerous if you have small children around so it is better to remove them. Before you start removing the handles, you have to make sure that the batteries are completely drained.

Second, you have to remove the ARG 10 outlet. This is the outlet that has the light red arrow on it. After that, you have to remove the outlet cover. Take note that the outlet is rectangular in shape. You can use the screwdriver to remove the cover of the outlet.

Thirdly, you have to remove the charging handle by opening it up. You can use the small Philips screwdriver to do this. Once you are done with this step, you can remove the batteries from the handle. Place the batteries inside the outlet. Then, you have to reconnect the handle.

Fourthly, you have to remove the power cable from the handle. Take note that the AC power cord is black in color. You have to remove the black cord from the AC outlet and place the new one. After that, you can replace the handle in the same way as you did it to the other models. You can also plug the batteries back in the handle to make sure that it is fully functional.

By doing those steps, you can replace the batteries to the charging handle. Just be sure that you have removed all the objects from your hands before you are going to do so. The next thing that you need to do is to turn the handle all the way down. Then, you can connect the new batteries into the handle in the same way as you did it with the original ones.

Fifthly, you can use the new charging handle to put in your laptop. In this case, you will have to place the laptop into the handle and then snap the handle into place. Just make sure that you have taken your time to snap it in place before you leave it to dry. Then, you can take the original AC power cord out from your laptop.

Finally, you can wipe off the dust and dirt in the handle. You can use a cotton cloth or any soft material to clean it. It is important for you to dry the handle in the proper place. You can use the dry towel to wipe off the dust in the handle. Then, you can place it back into the original housing of your laptop.

Comments are Disabled